Introduction

This is it. This is the best performing liquid cooling system we've ever configured. This is a no-compromises kit designed for the hardcore enthusiast looking to get the best out of his or her hardware.

Here's a brief run-down of what's included in the Water Cooling Ultimate 360 kit:

Swiftech APOGEE GTX CPU Water Block: The APOGEE GTX has been found in our testing to be one of the best performing out of the box CPU blocks available on the market. Optimal performance can be achieved with the APOGEE GTX when it's running in a dedicated CPU cooling loop.

Triple 120mm Thermochill Radiator: The king of performance radiators. There's not a whole lot else to say. Includes fan mounting hardware and metal 1/2" EK barbs.

Swiftech MCP655 Water Cooling Pump: This is responsible for cycling the water through your CPU block and radiator. The MCP655 is variable speed for ultimate performance, or near silent performance and it is rated for 50,000 hours MTBF.

Scythe S-FLEX SFF21F: With excellent static pressure and reasonably operation, these Scythe S-FLEX fans will allow your system to perform on the bleeding edge without causing bleeding ears.

Swiftech MCRES-MICRO: A reservoir simplifies bleeding and adds aesthetic appeal to your water cooling loop. The Swiftech MCRES-MICRO is a small, clear, and keeping with the high flow/high performance orientation of this kit, offers excellent flow rates.

Masterkleer 7/16" Tubing (10ft): This provides a better seal and easier cable routing than traditional 1/2" tubing with only a negligible loss of flow rate.

Primochill PC Pure : Primochill PC Pure is a performance oriented non-conductive coolant. That means that you should be protected against minor spills when you're setting up your system. In the event that you do get fluid on your hardware, dry it off, clean it with 99% rubbing alcohol and let it dry completely before attempting to power it on. There's some cool UV dye in the syringe for this stuff too :)

Magicool UV Zip Ties: Using inexpensive zip ties to secure tubing is an aesthetically appealing and effective way to ensure that no water leaks. Pull tight one zip tie on each barb.

 

Recommended Upgrades

Swiftech MCB-120 "Radbox": The Radbox is a convenient way to externally mount your radiator anywhere a 120mm fan would mount (assuming enough clearance - please see the product description for the included radiator for dimensions)

Swiftech MCW30 Chipset Water Block: The MCW30 is an easy way to add chipset cooling to your water cooled system. Please check compatibility with your motherboard before ordering this item

Full Cover Water Blocks: Check out this link for our full selection of full cover GPU water blocks. Find the one that matches your video card and add it to the cart. This system can take the heat.

Zalman ZM-RHS1 VGA RAM sink 8 pack: If you opt for a GPU only block, you may also need additional cooling for your video card memory and voltage regulators. This kit includes enough RAMsinks for X1950/7900 series video cards and below. It may be necessary to purchase an additional kit, or fabricate a couple extra heatsinks for an HD2900/8800 series video card.

Water Additives+: Due to the all-copper design of our water cooling system, and the included Primochill PC Pure coolant, an additive is not necessary for this kit. You can certainly add any Primochill dye bomb to your PC Pure for great UV effects.