|
|
Customer Reviews of Swiftech MCP355
|
Product reviews on NCIX.com are screened for relevance and inappropriate
content. Reviews may contain inaccurate information about the product.
If there is a discrepancy, please use the Flag this Review link
located beside each review. Reviews are not an endorsement expressed by
NCIX.com, but opinions from customers based on their own experience with
a product. We do not recommend you make purchasing decisions based on facts or opinions expressed regarding
Swiftech MCP355 reviews.
Recommend By
100%
Out of 13 Review(s)
5 star: (6)
4 star: (7)
3 star: (0)
2 star: (0)
1 star: (0)
Average Rating
ross_w
04/15/13
Experience: 90 Days
|
Pros
great preforming pump. compact size
|
Cons
pricematch needed
|
Summary
grea performance can be made min. 15% better with new pump top also gives you choice of fittings rather than 33/8 plastic factory barbs
|
|
|
Loden
11/24/10
Experience: 1 Years
|
Pros
Tiny pump,
Great head pressure,
Good quality (swiftech pump are one of the best out there)
|
Cons
Only 1 year warranty under NCIX,
Can be loud
|
Summary
Had a couple of those and mcp655 as well all with custom top EK and XSPC.
Work pretty much 24/7 for a year now and only one issue so far... I made the mistake of buying TT coolant who gunked my pump and WB :x
The main issue with this pump is the vibration, so each of mine are wrap with foam in order to cancel this annoying vibration sound.
If your limited is space, this pump can fit anywhere.
|
|
|
Gaspebeach
11/06/10
Experience: 4 Months
|
Pros
That what i want 3 years ago when i start watercooled setup!
|
Cons
are you kidding!!
|
Summary
previously i use a mcp655 3 in 3 year all! dead!!
they have no power compare to this pump!!
BUY IT!!
|
|
|
Mathieu_L
10/26/10
Experience: 7 Days
|
Pros
Great foot print, silent, great water mover
|
Cons
Need a top if you want to use 1/2 barbs
|
Summary
this is not the 1st time I use this pump. I made many builds with it, and was never unhappy. Personnaly, I prefer this one over the d655 even with the need of a custom top.
|
|
|
Michael_K
05/08/10
Experience: 30 Days
|
Pros
does the job so far
|
Cons
none
|
Summary
takes a lot of power and you may need to upgrade your power supply, I used it with an Antec earthwatts 650 and ended up underpowering my graphics card to the point where the card is now toast If you have a similar power supply with one rail you might have better luck or else get a bigger one I am now using a cooler master silent pro 1000 and no problems
the unit is quiet and even though it makes a slight noise in a case it is not noticeable
|
|
|
angelos
01/08/10
Experience: 53 Days
|
Pros
Great pump for the price
|
Cons
none
|
Summary
I bought this pump to work with a XPC top to replace my aging MCP655. This pump works great and was able to flow much better then the other one.
|
|
|
stoanee
09/24/09
Experience: 2 Weeks
|
Pros
Quiet, good flow, small footprint.
|
Cons
None
|
Summary
I bought this and put an XSPC res/pump top on it. It runs nice and quiet and gets the job done. The only issue is that if you use a Bitspower 1/2" compression fitting on the top port you will not be able to remove the fill plug on top. This really is not that important as I only had to loosen the plug a wee bit to bleed out the air.
|
|
|
David_B
11/13/08
Experience: 1 Weeks
|
Pros
better the the pump that came with my LCing case,
small so it can be hidden easly
|
Cons
a bit loud but so are the 5 fans in the case.
|
Summary
what can i say, it does what its made to do and does it good. easy to place anywhere in the case,
you my have a hard time remembering which way is in and which way is out
|
|
|
Cz3ch
07/04/08
Experience: 4 Months
|
Pros
prize
shape
|
Cons
cant adjust barbs
|
Summary
I bought this pump as my no name stopped working. This pump worked great and was able to flow much better then the other one. I would recommend this nice strong little pump.
|
|
|
Pawel_P
05/31/08
Experience: 3 Months
|
Pros
more powerful than most water cooling pumps
|
Cons
a bit loud for my tastes
dumps a bit of heat into cooling loop
|
Summary
Its a great little pump for an average setup. I was expecting it to be a bit more powerful but it still is better than the other stuff available dedicated to computer cooling. Noise is a bit of an issue for a silent system (however, have to find those noise reducing baffles that are available in the EU)
|
|
|
|
|
Features
Introducing the MCP355™ pump: despite a remarkably small
footprint of 2.4" square, the MCP355 features an astounding 20ft of head to
provide superior flow rates in today's most complex liquid cooled systems. The
MCP355 is also a high reliability, high pressure industrial pump, featuring a
50,000 hour MTBF (5 year lifetime). Such reliability is afforded by the unique
design of this pump, which contains only one moving part: the magnetically
drivenrotor/impeller spins
on a single ceramic bearing, thus extending the life of this pump beyond
existing standards.
The pump is completely plug-and-play, and connects directly to
any computer power-supply through standard 4 pin power connectors. It's compact
and powerful motor make it ideally suited for extreme duty cooling in
environments where space is at a premium.
Summary of features and benefits
-
Small Footprint: 2.4" x
2.4" x 1.5"
- 50,000 hours MTBF (Mean Time
Between Failure) equivalent to 5 years lifetime.
- Superior 12 Volts DC
convenience: plugs into the computer power supply
- The MCP355™ can be used with
full confidence in any MP servers, and high-end workstations.
- Superior real world performance
thanks to its high pressure characteristics (20ft of head). The MCP355™ is
particularly well adapted to the proliferation of daisy-chained liquid
cooling devices in a single circuit: Multiple Processors, Chipset, Graphics,
and Hard Drives.
- 3/8" barb fittings.
- No maintenance when used with
de-mineralized water, and anti-fungal additives (Our HydrX™ additive is
recommended)
- Quick installation with
adhesive neoprene pad, or permanent installation with screws and grommets.
- RPM sensor plugs to 3 pin
motherboard fan connectors and reports impeller rotational speed
A Note of Caution! the
MCP355 generates higher audible noise than the MCP350 andMCP655 pumps.
This product is not recomended for users seeking silent operations.
|
|
|
|
Technical specificationsNominal voltage | 12 V DC | | Operating voltage range | 8 to 13.2 VDC | | Minimum starting Voltage | 9 VDC | Nominal power (@ 12 V) | 18 W | | Nominal current (@ 12 V) | 1.46 amps | Nominal head (@ 12 V) | 20.2 ft (6.1 m) | Nominal discharge (@ 12 V) | ~ 120 GPH (454 LPH) | Connection size | 3/8" barbs (10mm) | | Maximum pressure | 22 PSI (1.5 BAR) | | Temperature range | Up to 140°F (60°C) | Electrical connector | Molex 4 pin | Weight | 7.3 oz (207 gr.) | | Our noise measurement (non lab environment) | 30 ~ 32 dBA in a quiet room @ 2' | | Motor type | Electronically commutated, brushless DC, spherical motor | | Pump MTBF (Mean Time Between Failures) | 50,000 Hours | | RPM Sensor | 3 pin connector |
|
Forum messages are not reviewed and may not contain accurate information about a product.
Message contents are opinions from customers based on their own experience with a product.
We do not recommend you make puchasing decisions based on Forum messages.
|
Product Warranty
|
1 year limited warranty through NCIX.com.
|
Sales Policy
|
All pricing subject to change. For all prices,
products and offers, NCIX.com reserves the right to make adjustments
due to changing market conditions, product discontinuation, manufacturer
price changes, errors in advertisements and other extenuating
circumstances. Promotional offers from NCIX.com are subject to
availability and are available only while supplies last. No rain
checks will be issued on promotional items and offers.
While NCIX.com uses all reasonable efforts
to include accurate and up-to-date information on the Site, NCIX.com
makes no warranties or representations as to the Site's accuracy.
NCIX.com assumes no liability or responsibility for any errors
or omissions in the content on the Site.
NCIX.com warrants product(s) to be in good
working condition and free from defects in material and workmanship
for a period of one (1) year for OEM packages, and for thirty
(30) days for RETAIL packages (excluding laptops and notebooks), from the original Invoice date
unless otherwise restricted below or by the manufacturer's own
warranty policy. Defective returns and warranty service will be
replaced, exchanged or repaired at NCIX.com's sole discretion,
and based on vendor's policy.
NON-DEFECTIVE merchandise returns may be
accepted on some items ONLY within 15 days of the Invoice date,
at NCIX.com's discretion.
Laptops and Notebooks can be returned within SEVEN (7) days
from original invoice date. Return will only be accepted with original
packaging, accessories, cables, free gifts (if applicable), unopened software and
manuals and is subject to inspection before warranty approval. Laptop and notebook with
tampered serial numbers or UPC code will be denied returns.
GOVERNMENT & BUSINESS Laptop and Notebook purchases made with government or business POs can be returned typically within fourteen (14)
days from original invoice date. Return will only be accepted with original packaging, accessories, cables, free gifts (if applicable), unopened
software and manuals and is subject to inspection before warranty approval. Laptop and notebook with tampered serial numbers or UPC code will be
denied returns. Please check with your B2B sales representative for specific terms and details.
All NON-DEFECTIVE returns are subject
to a 15% restocking fee. No refunds will be issued for blank media,
digital camera (and accessories), opened software, printers,
printer supplies, paper, projectors (and accessories), appliances,
handhelds, PDAs, notebook computers, special order computers and
special order items.
Defective software, video games or DVDs
will be replaced by the SAME title and format ONLY (and subject
to current availability) within 30 days of the Invoice date. Software, Drones,
video games and DVDs may be returned within 30 days only if the
item is UNOPENED (with shrink wrap still intact) at the sole discretion
of NCIX.com.
NCIX.com does NOT apply a surcharge
to credit card orders. Please read our RMA
& warranty policy and terms
& conditions for more information. If you have
any questions regarding our sales and warranty policies, please
send us a message -- we'll be glad to answer any of your questions.
|
|
|
|
|
Contentname:biz_Home_Vertical_StoreWeekly
Contentname:NCIX-featured-rotational
Contentname:160x300_Tier
|
|
